We offer a variation of bar type TFTs e.g. for HiFi or rack applications, e.g.
4.6" TFT
5.8" TFT
6.5" TFT
9" TFT
We offer a variation of bar type TFTs e.g. for HiFi or rack applications, e.g.
4.6" TFT
5.8" TFT
6.5" TFT
9" TFT
Normal displays, especially TFTs, are difficult to read in direct sunlight. If you want to make them sunlight readable, you need to consider some points in the design of your TFT module.
1. The surface brightness must be at least 500 cd/m2, in fact it is better to provide e.g. 800 cd/m2.
You may notice that you will increase the brightness of your smartphone in direct sunlight. If you decrease the brightness, the TFT seems to be black. So an essential point in order to design sunlight readable applications is to increase the surface brightness with a powerful backlight.
2. Use an anti-glare surface or anti-reflection coating.
With a special anti-glare lens or anti-reflection coating you can reduce reflections on the surface of the module, which make the TFT difficult to read in direct sunlight.
3. Use optical bonding of front-glass and touch to display
Additional boundary layers in the module, between frontglass and touch as well as touch to TFT, cause additional reflections. Eliminating those boundaries by bonding the parts with optical clear adhesive or optical clear resin, will increase sunlight readability.
Please contact us for further questions on sunlight readable modules, we are happy to help!
TFT modules with gasket bonding have an air gap between touch sensor and TFT. This gap leads to reflections in the TFT and is also the reason why TFTs look greyish, not black, in power off state.
The traditional solution to this problem is full-lamination, however this option is costly and not suitable for all types of cell and coverlens combinations.
An anti-reflection - moth eye - film can be a cost efficient alternative eliminating interfering reflections.
In off state, the module looks more blackish, which gives the application a fine look.
Most TFT-modules can be equipped with moth eye film, contact us for inquiries!
LCDs can be equipped with high-quality frontglasses that can be customized in form and print.
All our frontglasses are chemically hardened and several standard thicknesses are available.
Typical thicknesses are
0.7 mm
1.1 mm
2 mm
2.8 mm
Further options are available on request.
With a 1.22" TFT we offer the perfect display for wearables such as smart watches or fitness tracker.
Details:
Resolution of 204 x 240
Outline dimension 33.76 x 33.40 x 1.24
Active area 33.36(H)x 32.70(V)
Viewing angle 80/80/80/80
Brightness 500 cd/m²
Please contact us for a detailed datasheet: Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein!
LCD Mikroelektronik GmbH
Otto-Lilienthal-Str. 13
76275 Ettlingen
Germany
Telefon: +49(0)7243-76888-0
Telefax: +49(0)7243-76888-29